Fujitsu Lifebook S904 Operating Manual Download Page 23

Page: 23 / 94

Working with the notebook

Power-on indicator

Indicator is lit

The notebook is switched on.

Indicator is

ashing

The notebook is in power saving mode.

Indicator is not
lit

The notebook is switched off or is in Save-to-Disk mode.

Battery charging indicator

White:

The mains adapter is connected and the battery or batteries
installed is/are fully charged.

Indicator is lit

Orange:

The mains adapter is connected and the battery or batteries
installed is/are being charged.

Indicator is

ashing

Orange:

The mains adapter is connected and the battery or batteries
installed cannot be charged (the battery is too hot for charging).

Indicator is not
lit

The mains adapter is not connected.

In sleep mode (S4) and when switched off (S5), the battery button

provides information

on the state of charge of the two batteries. Press the button and the battery indicator lights up.
The meaning of the colours corresponds to the following table with statuses S1 to S3:

Fujitsu

Summary of Contents for Lifebook S904































































































Search results

Summary of Contents for Lifebook S904

Reviews:

Brands by name

Popular brands

Fujitsu Lifebook S904, Operating Manual

Search results

Summary of Contents for Lifebook S904

Reviews:

Brands by name

Popular brands