Fujitsu Lifebook S6231, User Manual, Page: 55 / 112

47
U s e r I n s t a l l a b l e F e a t u r e s
Figure 4-22. Connecting an External Monitor
S-VIDEO OUT PORT (TV OUT)
The S-Video port allows you to connect and use directly
any S-Video device, such as a VCR or television. The
S-Video standard provides for a higher quality picture
than NTSC or PAL. In order to connect an S-Video
device, follow these easy steps:
(Figure 4-23)
1. Attach the mini S-Video cable adapter (Figure 2-3)
(included with your system accessories) to the S-
Video cable from the device.
2. Align the connector with the port opening.
3. Push the connector into the port until it is seated.
When S-Video is connected, you can toggle the S-Video
device on and off by pressing the [F11] key while
holding down the [Fn] key.
Figure 4-23. Connecting an S-Video Device
Pressing the [Fn] + [F10] keys allows you
to change your selection of where to send
your display video. Each time you press the
key combination, you will step to the next
choice, starting with the built-in display
panel only, moving to the external monitor
only, finally moving to both the built-in
display panel and an external monitor.
S Series.book Page 47 Friday, October 15, 2004 4:46 PM