Fujitsu LIFEBOOK P728 Page 96 Operating Manual Download

Page: 96 / 126

Troubleshooting and tips

The battery discharges too quickly

Battery

Cause

Troubleshooting

The battery is either too hot or too cold. In this
case the battery indicator ﬂashes.

► Move the notebook so that its temperature

returns to within the normal range.

► If the operating time of the battery life is

extremely short, the battery is probably too
old. Replace the battery if necessary.

You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.

► Use the AC adapter whenever possible.

The maximum brightness may have been set
for the screen.

► Set the screen slightly darker with the key

for

Decreasing the screen brightness

in order to

reduce the amount of power being drawn.

Smart Card reader is not recognized

Cause

Troubleshooting

Smart Card inserted incorrectly.

► Make sure you have inserted your Smart

Card into the Smart Card reader with
the chip facing upwards / downwards
(device-dependent).

► Check whether the Smart Card you are

using is supported. Your Smart Card must
comply with the ISO standard 7816-1, -2,
-3 and -4.

Smart Card PIN forgotten

Cause

Troubleshooting

PIN forgotten

► If you are working in a network, contact your

system administrator, who can unlock your
notebook with a Supervisor PIN.

Smart Card lost

Cause

Troubleshooting

Smart Card lost.

► If you are working in a network, contact your

system administrator, who can boot your
notebook with a Supervisor Smart Card.

Fujitsu

Summary of Contents for LIFEBOOK P728































































































































Search results

Summary of Contents for LIFEBOOK P728

Reviews:

Related manuals for LIFEBOOK P728

Brands by name

Popular brands

Fujitsu LIFEBOOK P728, Operating Manual

Search results

Summary of Contents for LIFEBOOK P728

Reviews:

Related manuals for LIFEBOOK P728

Brands by name

Popular brands