Fujitsu LifeBook P702 Operating Manual Download Page 35

Page: 35 / 89

Working with the notebook

Scroll down/forwards or decrease volume

Depending on the selected ScrollWheel mode, you can either scroll down/forwards or decrease the
volume.

►

To change the ScrollWheel mode, tap the centre of the ScrollWheel until
the desired mode is displayed.

►

Move the cursor to the window you
wish to select.

►

Move your

nger clockwise on the

ScrollWheel.

You can scroll down or forwards or
can decrease the volume.

Scroll up/back or increase volume

Depending on the selected ScrollWheel mode, you can either scroll up/back or increase the volume.

►

To change the ScrollWheel mode, tap the centre of the ScrollWheel until
the desired mode is displayed.

►

Move the cursor to the window you
wish to select.

►

Move your

nger anticlockwise on

the ScrollWheel.

You can scroll up or back or can
increase the volume.

Back one page in Web browser

►

Tap the centre of the ScrollWheel.

The Web browser returns to the
previous page displayed.

Fujitsu Technology Solutions

Summary of Contents for LifeBook P702


























































































Search results

Summary of Contents for LifeBook P702

Reviews:

Related manuals for LifeBook P702

Brands by name

Popular brands

Fujitsu LifeBook P702, Operating Manual

Search results

Summary of Contents for LifeBook P702

Reviews:

Related manuals for LifeBook P702

Brands by name

Popular brands