Fujitsu LIFEBOOK P3110 Page 38 Operating Manual Download

Page: 38 / 75

Working with the notebook

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook to enable access to a mobile radio network in conjunction with an installed UMTS module.

Follow the instructions supplied by the provider of the SIM card.

The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.

Inserting the SIM card

►

Prepare for insertion of the SIM card, see chapter

"Preparing to remove components", Page 40

►

Slide the SIM card into the slot (1)
until it is felt to engage, as shown in
the battery compartment.

►

Complete the insertion, see chapter

"Finishing component removal", Page 43

Removing a SIM card

►

Prepare for removal of the SIM card, see chapter

"Preparing to remove components", Page 40

►

Push the SIM card inwards slightly to
eject it from the slot (1).

►

Pull the SIM card out of the slot in the
direction of the arrow (2).

►

Complete the removal, see chapter

"Finishing component removal", Page 43

A26391-K305-Z200-1-7619, edition 1

Summary of Contents for LIFEBOOK P3110












































































Search results

Summary of Contents for LIFEBOOK P3110

Reviews:

Related manuals for LIFEBOOK P3110

Brands by name

Popular brands

Fujitsu LIFEBOOK P3110, Operating Manual

Search results

Summary of Contents for LIFEBOOK P3110

Reviews:

Related manuals for LIFEBOOK P3110

Brands by name

Popular brands