manualshive.com logo in svg

Fujitsu LifeBook P2110, Manual

Share
Download
Fujitsu LifeBook P2110 Manual Download Page 72

56

Critical Point

Pressing the [Fn] + [F10] keys allows you to change your selection of where to send your
display video. Each time you press the key combination, you will step to the next choice,
starting with the built-in display panel only, moving to the external monitor only, finally moving
to both the built-in display panel and an external monitor.

Microphone Jack

The microphone jack allows you to connect an external mono microphone. Your microphone must be
equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook.
In order to connect a microphone follow these easy steps:

1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.

Mini-VGA Port

The mini-VGA port allows you to connect an external monitor. In order to connect an external monitor
follow these easy steps:

1 Take the mini-VGA cable out of the accessory package that came with your system.
2 Align the connector with the port opening.
3 Push the connector into the port until it is seated.

PAULING Sec 2_47-571

11/13/01, 2:38 PM

56

Summary of Contents for LifeBook P2110





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands