61
- Memory Upgrade Module
Removing a Memory Upgrade Module
1
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
notebook. (Figure 30)
4
Store the memory upgrade module in a static guarded sleeve.
5
Replace the cover and reinstall the screws.
Figure 29. Installing memory module
Figure 30. Removing memory module
Alignment Keys
Retaining Clips
Retaining Clip
Retaining Clip