Fujitsu Lifebook E751 Operating Manual Download

Page: 56 / 104

Working with the notebook

►

Position the notebook so that it is in line with the back edge and positioning
aid of the Port Replicator (1).

►

Push the notebook onto the Port Replicator in the direction of the arrow (2) until it engages.

Connecting the mains adapter to the Port Replicator

►

Connect the mains adapter cable to the DC
jack (DC IN) of the Port Replicator (1).

►

Connect the power cable to the
mains adapter (2).

►

Plug the power cable into the mains
socket (3).

When the notebook is connected to a Port Replicator, the operating system creates
a hardware pro

le for the "Docked" mode. In this pro

le, for example, the setting is

saved as to which monitor was last used for output. This pro

le will be loaded, as

soon as the notebook is connected to a Port Replicator of the same type.

Fujitsu Technology Solutions

Summary of Contents for Lifebook E751









































































































Search results

Summary of Contents for Lifebook E751

Reviews:

Related manuals for Lifebook E751

Brands by name

Popular brands

Fujitsu Lifebook E751, Operating Manual

Search results

Summary of Contents for Lifebook E751

Reviews:

Related manuals for Lifebook E751

Brands by name

Popular brands