background image

Manufacturer’s notes

FCC and IC Regulatory Information

Please note the following regulatory information related to the wireless LAN
device.

Regulatory Notes and Statements

Wireless LAN, Health and Authorization for use

Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of
these emissions, however, are far much less than the electromagnetic energy emissions from wireless
devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they
operate within the guidelines found in radio frequency safety standards and recommendations. The
use of Wireless LAN devices may be restricted in some situations or environments, such as:

On board an airplane, or

In an explosive environment, or

In situations where the interference risk to other devices or services is
perceived or identi

fi

ed as harmful.

In cases in which the policy regarding use of Wireless LAN devices in speci

fi

c environments is

not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operating the equipment.

Regulatory Information/Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or modi

fi

cations made

to this device that are not expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio or television interference
caused by unauthorized modi

fi

cation of this device, or the substitution or attachment of connecting

cables and equipment other than those speci

fi

ed by the manufacturer. It is the responsibility of the

user to correct any interference caused by such unauthorized modi

fi

cation, substitution or attachment.

The manufacturer and its authorized resellers or distributors will assume no liability for any damage
or violation of government regulations arising from failure to comply with these guidelines.

This device must not be co-located or operated in conjunction with any other antenna or transmitter.

For IEEE 802.11a Wireless LAN:

For operation within 5.15~5.25 GHz frequency range, it is

restricted to indoor environments, and the antenna of this device must be integral.

Federal Communications Commission statement and Industry
Canada statement:

This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause
interference, and, (2) This device must accept any interference, including interference
that may cause undesired operation of this device.

Fujitsu

87

Summary of Contents for LIFEBOOK E548












































































































Reviews: