Fujitsu LIFEBOOK E4411 Operating Manual Download

Page: 47 / 93

Working with the notebook

SIM card (con

guration dependent)

The LIFEBOOK E4511 is shown below. The procedure is identical for both device variants.

All device variants support nano SIM cards.

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook and, together with an integrated LTE module, enables access to a mobile radio network.

Follow the instructions supplied by the provider of the SIM card.

The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.

Inserting the SIM card

►

Prepare for installation of the SIM card, see chapter

"Preparing to remove components", Page 64

►

Remove the battery, see

"Removing a battery", Page 37

►

Pull the SIM card holder out of the slot (1).

►

Insert the SIM card (a) into the SIM card holder (2) as shown in the
diagram on the SIM card holder (b).

►

Slide the SIM card holder back into its slot (3).

►

Install the battery again, see

"Installing a battery", Page 38

►

Complete the installation, see

"Finishing component removal", Page 69

Fujitsu

Summary of Contents for LIFEBOOK E4411






























































































Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands

Fujitsu LIFEBOOK E4411, Operating Manual

Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands