Fujitsu LIFEBOOK E4411 Operating Manual Download

Page: 45 / 93

Working with the notebook

Memory cards

Slot

Your notebook is equipped with an integrated memory card reader.

Observe the manufacturer’s instructions when handling the memory cards.

Memory card

Supported formats

Your notebook supports the following format:

•

Secure Digital (SD

card)

Inserting the memory card

►

Carefully push the memory card into the
slot until you feel it click into place. The
label area must be facing upward. Do not
apply any force, otherwise the delicate
contact surfaces could be damaged.

Memory card

Depending on the particular type
used, the memory card may protrude
slightly from the slot.

Removing the memory card

Memorycard

In order to protect your data, always follow the correct procedure for removing
the card (see the documentation for your operating system).

►

On devices with card locking: Press
on the memory card (1).

Memory card

The memory card is released and
can now be removed.

►

Pull the memory card out of the slot (2).

Fujitsu

Summary of Contents for LIFEBOOK E4411






























































































Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands

Fujitsu LIFEBOOK E4411, Operating Manual

Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands