background image

23

G e t t i n g   S t a r t e d

Figure 3-1 Connecting the AC Adapter

Power Sources

Your Fujitsu LifeBook notebook has three possible 
power sources: a primary Lithium ion battery, an AC 
adapter or an optional Auto/Airline adapter.

CONNECTING THE POWER ADAPTERS

The AC adapter or optional Auto/Airline adapter 
provides power for operating your notebook and 
charging the batteries. 

Connecting the AC Adapter

1. Plug the DC output cable into the DC power jack

of your LifeBook notebook.

2. Plug the AC adapter into an AC electrical outlet. 

(Figure 3-1)

Connecting the Optional Auto/Airline Adapter

1. Plug the DC output cable into the DC power jack

on your notebook.

2. Plug the Auto/Airline adapter into the cigarette 

lighter of an automobile with the ignition key in
the On or Accessories position.

OR

3. Plug the Auto/Airline adapter into the DC power 

jack on an airplane seat.

Switching from AC Adapter Power or the
Auto/Airline Adapter to Battery Power

1. Be sure that you have at least one charged

battery installed.

2. Remove the AC adapter or the Auto/Airline adapter.

DC Power Jack

DC Output Cable

AC Adapter

AC Cable

The Lithium ion battery is not charged 
upon purchase. Initially, you will need to 
connect either the AC adapter or the 
Auto/Airline adapter to use your 
notebook.

ferret.book  Page 23  Monday, April 23, 2007  1:32 PM

Summary of Contents for Lifebook A6030

























































































































Reviews: