background image

11

Vertical Air Direction Adjustment

Press the SET button (Fig. 5 

K

).

Each time the button is pressed, the air direction range will change as follows:

 1 

 2 

 3 

 4 

 5 

 6 

Types of Air ow Direction Setting:

1, 2, 3 : During Cooling/Dry modes
1, 2, 3, 4, 5, 6 : During Fan mode

The Remote Controller's display does not change.

  Use the air direction adjustments within the ranges shown above.

 The vertical air ow direction is set automatically as shown, in accordance with the 

type of operation selected.

 

During Cooling/Dry mode : Horizontal  ow 1

  During AUTO mode operation, for the  rst a few minutes after beginning operation, 

air ow will be horizontal 1; the air direction cannot be adjusted during this period.

Right-Left Adjustment

Adjust the Right-Left louvers.

Move the Right-Left louvers to adjust air ow in the direction you prefer.

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Vertical (up-down) direction of air ow is adjusted by pressing the Remote Controller's SET button. Horizontal (right-left) air ow direc-
tion is adjusted manually, by moving the Air ow Direction Louvers.
Whenever making horizontal air ow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are 
stopped.

 

DANGER

Never place  ngers or foreign objects inside 
the outlet ports, since the internal fan operates 
at high speed, and personal injury could be 
caused.

  Always use the Remote Controller's 

SET button to adjust the vertical air ow 
l o u v e r s . A t t e m p t i n g  t o  m o v e  t h e m 
m a n u a l l y  c o u l d  r e s u l t  i n  i m p r o p e r 
operation; in this case, stop operation 
and restart. The louvers should begin to 
operate properly again.

  During use of the Cooling and Dry 

modes, do not set the Air ow Direction 
Louvers in range (4–6) for many hours, 
since water vapor may condense near 
the outlet louvers and drops of water 
may drip from the indoor unit. During the 
Cooling and Dry modes, if the Air ow 
Direction Louvers are left in range 4–6 
for more than 30 minutes, they will 
automatically return to position 3.

  When used in a room with infants, 

children, elderly or sick persons, the 
air ow direction and room temperature 
should be considered carefully when 
making settings.

 

CAUTION

When adjusting the Right-Left Louvers, it 
is necessary to stop the Vertical (up-down) 
louvers first and make sure that it stops 
completely before adjusting the direction.

1

2

3

4
5

6

Knob (2 places) 

Right-Left Louvers

Knob

9332428018_OM_EN.indd   11

9/20/2011   9:39:10 AM

Summary of Contents for Inverter 9332428032

















Reviews: