En-2
Cleaning the air
fi
lter
1
Push the intake grille push
buttons (two places) and
open the intake grille.
2
Pull out the air
fi
lter from the
intake grille.
3
Clean the air
fi
lter.
Remove the dust from the air
fi
lter by vacuuming or
washing it. After washing, allow the air
fi
lter to dry thor-
oughly in an area protected from sunlight.
• Dust can be cleaned from the air
fi
lter either with a
vacuum cleaner, or by washing the air
fi
lter in a solu-
tion of mild detergent and warm water. If you wash the
air
fi
lter, be sure to allow it to dry thoroughly in a shady
place before reinstalling.
• If dirt is allowed to accumulate on the air
fi
lter, air
fl
ow
will be reduced, lowering operating ef
fi
ciency and
increasing noise.
4
Re-attach the air
fi
lter to the
intake grille.
1
Replace the air
fi
lter into its
holder.
2
Make sure that the air
fi
lter
makes contact with the
fi
lter
stopper when it is replaced
into its holder.
5
Close the intake grille.
NOTES
Filter sign
Select appropriate intervals for displaying the
fi
lter sign on
the indoor unit according to the estimated amount of dust in
the air of the room.
Please consult authorized service personnel when using this
function.
For detailed instructions on how to operate, please refer to
the Operating manual of the remote controller.
NAME OF PARTS
Indoor unit
2
-[1]
2
-[2]
2
-[3]
2
-[4]
1
3
1
Air
fi
lter (in air intake grille)
2
Air
fl
ow direction outlet
Individual air
fl
ow direction control: [1][2][3][4]
3
Air intake grille
4
Remote controller *
*: For detailed instructions on how to operate, please refer to
the Operating manual of the remote controller.
CLEANING AND CARE
CAUTION
• Before cleaning the unit, be sure to stop the unit
and disconnect the power supply.
• Turn off the electrical breaker.
• The fan operates at high speed inside the unit,
and could result in personal injury.
• Be careful not to drop the intake grille.
• As
fi
lter cleaning involves work in high places,
please consult authorized service personnel.
• Do not expose the unit to liquid insecticides or
hair sprays.
• When used for extended periods, the unit may accumulate
dirt inside, reducing its performance. We recommend that
the unit be inspected regularly, in addition to your own
cleaning and care. For more information, consult autho-
rized service personnel.
• When cleaning the unit, do not use water hotter than 104°F
(40°C), harsh abrasive cleansers, or volatile agents like
benzene or thinner.
• If the unit will not be operated for a period of 1 month or
more, be sure to allow the inner parts of the unit to dry
thoroughly, in advance, by operating the unit in Fan mode
for half a day.
9381622061-02_OM_3L.indb 2
9381622061-02_OM_3L.indb 2
11/2/2018 11:31:08 AM
11/2/2018 11:31:08 AM
