- 41 -
BIOS Setup
English
&
&
&
&
&
SiS Serial ATA Controller
Enabled
Enabled onboard SATA controller. (Default value)
Disabled
Disable this function.
&
&
&
&
&
SiS Serial ATA Mode
IDE
Set onboard SATA controller function as IDE. (Default value)
RAID
Set RAID function (two SATA drives necessary)
(for detailed information see SIS 964 SATA-RAID user manual)
&
&
&
&
&
Onboard Serial Port 1
Disabled
Disable onboard Serial port 1.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
Auto
BIOS will automatically setup the port 1 address.
&
&
&
&
&
Onboard Parallel port
Disabled
Disable onboard LPT port.
378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
&
&
&
&
&
Parallel Port Mode
SPP
Using Parallel port as Standard Parallel Port.
EPP
Using Parallel port as Enhanced Parallel Port. (Default value)
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
&
&
&
&
&
ECP Mode Use DMA
This function will available when "Parallel Port Mode" set at ECP or ECP+EPP.
1
Set ECP mode Use DMA to 1.
3
Set ECP mode Use DMA to 3. (Default value)
