- 19 -
Hardware Installation Process
English
12) F_AUDIO (Front Audio Connector)
If you want to use Front Audio connector, you
must remove 5-6, 9-10 Jumper.
In order to utilize the front audio header, your
chassis must have front audio connector. Also
please make sure the pin assigment on the cable
is the same as the pin assigment on the MB
header. To find out if the chassis you are buying
support front audio connector, please contact your
dealer.
13) CD_IN (CD Audio Line In)
CD-R
CD-L
GND
Connect CD-ROM or DVD-ROM audio out to
the connector.
1
10) PWR_LED
MPD+
MPD-
MPD-
1
PWR_LED is connect with the system power
indicator to indicate whether the system is
on/off. It will blink when the system enters sus-
pend mode.
If you use dual color LED, power LED will turn
to another color.
11) RAM_LED
Do not remove memory modules while RAM
LED is on. It might cause short or other unex-
pected damages due to the 2.5V stand
by voltage. Remove memory modules only
when STR function is disabled by jumper and
AC Power cord is disconnected.
+
_
1
GND
Reserved
MIC
Rear Audio (R)
Rear Audio (L)
Front Audio (R)
Front Audio (L)
Power
REF
10 9
2
