manualshive.com logo in svg

Fujitsu GA-8ISXT-FS P4 Titan, User Manual, Page: 39 / 52

Share
Download
Fujitsu GA-8ISXT-FS P4 Titan User Manual Download Page 39

- 3

9 - BIOS Setup

English

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 Controller. (Default value)

Disabled

Disable USB 2.0 Controller.

USB Keyboard Support

Enabled

Enable USB Keyboard Support. (Default value)

Disabled

Disable  USB Keyboard Support.

USB Mouse Support

Enabled

Enable USB Mouse Support.(Default value)

Disabled

Disable USB Mouse Support.

AC97 Audio

Auto

Enable onboard AC'97 audio function. (Default Value)

Disabled

Disable this function.

AC97 Modem

Auto

BIOS will search MC97 Codec (AMR Modem Card). If found, MC97

function will be enabled. If no MC97 Codec found, MC97 function will be

disabled. (Default Value)

Disabled

Disable this function.

Onboard  H/W 1394

Enable

Enable onboard IEEE 1394 function.(Default value)

Disable

Disable this function.

Onboard H/W LAN

Enabled

Enable Onboard H/W LAN function. (Default value)

Disabled

Disable this function.

Summary of Contents for GA-8ISXT-FS P4 Titan





















































Reviews:

No comments