background image

These instructions provide details on using the FPCCC27/ 
FPCCC27P Harsh Environment Case (HEC). The FPCCC27 
HEC is designed for use with your Stylistic ST4000 Tablet 
PC (with active digitizer); the FPCCC27P HEC is designed 
for use with your Stylistic ST4000P Tablet PC (with passive 
digitizer). The HEC provides maximum protection against 
water, dust, and other hazards when transporting, using, or 
storing the Tablet PC.

We strongly recommend that you read these instructions 
prior to using the HEC with your computer. 

Note the following when using the HEC: 

• To avoid overheating, suspend the Tablet PC when 

charging the battery pack while the system is in the case 
and not in use. 

• To prevent scratches, a screen protector should be 

installed on the display window of the HEC. Two screen 
protectors are provided with the HEC. Additional 
screen protectors can be obtained from your reseller, or 
from the Fujitsu Web site at: us.fujitsu.com/computers.

I N S T R U C T I O N S

Harsh Environment Case 
User’s Guide

FPCCC27/FPCCC27P

F u j i t s u   C o m p u t e r   S y s t e m s

FPC58-0720-02.fm  Page 1  Wednesday, January 7, 2004  3:08 PM

Summary of Contents for FPCCC27P









Reviews: