Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
MCU-AN-500059-E-12 – Page 11
2.5 Easy Kit Mode Setting
A mode switch on Easy EV-Board is used to select Easy Kit between debug mode and free
run mode, as shown in the figures below.
Figure 2-7: Mode Switch from Top View
Figure 2-8: Mode Switch from Top View
Set mode switch on Easy Kit to debug mode as Figure 2.5-3. In this mode, after connecting
the Easy Kit to USB interface, user could start debug in the SOFTUNE on PC.
Figure 2-9: Easy Kit Debug Mode Setting
Set mode switch on Easy Kit to free run mode as Figure 2.5-4. In this mode, the target MCU
is in free run mode after connecting Easy Kit to USB interface.
Figure 2-10: Easy Kit Free Run Mode Setting
Mode switch
Mode switch
