ADA-16FX-ETHERNET
Chapter 3 Installation
© Fujitsu Microelectronics Europe GmbH
- 7 -
UG-960011-10
3.1 Jumper settings of ADA-16FX-ETHERNET
The following jumper settings are set by default:
Jumper
Description / Function
Type
Default
JP1
Use chip select line 2
solder JP 2pol. Closed
JP2
Use chip select line 3
solder JP 2pol.
Open
JP3
Use chip select line 4
solder JP 2pol.
Open
JP4
Select center tap A of Ethernet jack
solder JP 3pol.
1-2
JP5
Select center tap B of Ethernet jack
solder JP 3pol.
1-2
Please refer to the documentation of the evaluation board for detailed information about the
jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC).
