Fujitsu fi-7160 Operator'S Manual Download

Page: 20 / 229

Appendix

Chapter 1 Scanner Overview

How to Load
Documents

Configuring the
Scan Settings

How to Use the
Operator Panel

Replacing the
Consumables

Scanner
Overview

fi-7260/fi-7280

■

Front

Stopper

Lift up to adjust to the document length.

Operator panel

Consists of an LCD, buttons, and LED
indicator.
Can be used to operate the scanner or
check the status.
For details, refer to

"Chapter 4 How to Use

the Operator Panel" (page 61)

ADF (Automatic Document Feeder)

Pulls and feeds the documents one sheet at a
time from the ADF paper chute (feeder).
Open to replace consumables or clean the
inside of the scanner.

Side guides

Guides the documents in width direction as
they are fed into the scanner.

Chute extension 2

Pull out to adjust to the document length.

ADF paper chute (feeder)

Holds the documents to be scanned.

ADF release tab

Pull this tab to open the ADF.

Flatbed

For scanning documents (e.g. thin paper,
books) that cannot be scanned with the ADF.

Chute extension 1

Pull out to adjust to the document length.

Stacker

Stacks up the ejected documents.

Transport lock switch

Locks the carrier unit (which is inside the
flatbed) to prevent damage during
transportation.

Summary of Contents for fi-7160






































































































































































































































Search results

Summary of Contents for fi-7160

Reviews:

Related manuals for fi-7160

Brands by name

Popular brands

Fujitsu fi-7160, Operator'S Manual

Search results

Summary of Contents for fi-7160

Reviews:

Related manuals for fi-7160

Brands by name

Popular brands