Fujitsu Fi-7030, Operator'S Manual

Page: 96 / 163

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
96
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Situation in which the document is not fed into
the ADF occurs frequently.
*1: "Consumables" refers to the Roller Set (the brake roller and the pick roller).
Do the documents meet the requirements described in
"Precautions" in
"Conditions" (page 35) ?
No
Use documents that meet the requirements.
For details, refer to
"2.2 Documents for Scanning" (page 35) .
Yes
Did you fan the documents before loading them in the ADF
paper chute (feeder)?
No
Fan the documents before loading them. Or reduce the amount of documents.
Yes
Are the consumables
(*1)
installed correctly?
No
Install the consumables
(*1)
correctly.
For details, refer to "Chapter 6 Replacing the Consumables" (page 72) .
Yes
Are the consumables
(*1)
clean?
No
Clean the consumables
(*1)
.
For details, refer to "Chapter 5 Daily Care" (page 62) .
Yes
Are the consumables
(*1)
worn out?
Yes
Check the consumable counters and replace the consumables if necessary.
For details, refer to
"Chapter 6 Replacing the Consumables" (page 72) .
No
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.