Chapter 2 How to Load Documents
40
Fig. 2
ATTENTION
The above condition applies when the document is set to the center
of the pick roller width.
When you use detection by overlapping, scanning thick documents
such as plastic cards will be falsely detected as multifeed.
To scan such documents, disable the multifeed window display
function of the scanner driver, the Intelligent Multifeed function, or
the multifeed detection setting.
Center
Top
Reference point
Feed
direction
Front side
(Unit: mm)
Bottom
50
HINT
Accuracy of multifeed detection may drop with some documents.
Multifeed cannot be detected for the top 30 mm of a document.
For the shaded area in
, you can also specify a
length not to detect multifeeds in the Software Operation Panel.
For details, refer to
"8.6 Settings Related to Multifeed Detection"
.
