Fujitsu fi-65F Operator'S Manual Download Page 47

Page: 47 / 85

Appendix

Chapter 6 Troubleshooting

How to Scan
Documents

Configuring the
Scan Settings

Vertical streaks appear on the scanned image.

Do the streaks always appear in the same location?

Yes

Clean the document pad and the document bed.
For details, refer to

"Chapter 5 Daily Care" (page 34).

Does the vertical streak disappear when you set a lower
resolution?

Yes

Specify a lower resolution.

Is there any foreign matter (e.g. dust, paper dust) on the
document?

Yes

Remove any foreign matter off the document.
It may be carried onto the document bed, and cause these streaks to appear on
the image.

If the problem persists, check the items in

"6.2 Before You Contact the Scanner

Service Provider" (page 52)

first, then contact your FUJITSU scanner dealer or an

authorized FUJITSU scanner service provider.

Summary of Contents for fi-65F






















































































Search results

Summary of Contents for fi-65F

Reviews:

Related manuals for fi-65F

Brands by name

Popular brands

Fujitsu fi-65F, Operator'S Manual

Search results

Summary of Contents for fi-65F

Reviews:

Related manuals for fi-65F

Brands by name

Popular brands