Chapter 3 How to Use the Operator Panel
49
About the Indicators
Paper Separation Force
Displays the paper separation
force as follows:
For information on how to
adjust the paper separation
force, refer to
the Paper Separation Force"
(page 25)
.
Icon
Low High
iMFF Setting
Displays the iMFF setting as follows:
The icon switches when the [iMFF]
button is pressed down for more than
two seconds. In Manual mode,
is displayed at all times.
In Auto mode 1 and Auto mode 2, it
displays the number of multifeed
patterns memorized (max. of 8
patterns). For information on how to
configure the iMFF setting, refer to
Icon
Mode
Manual mode
Auto mode 1
Auto mode 2
Multifeed Pattern Memory
appears when memorizing a multifeed pattern.
For information on how to memorize multifeed patterns, refer to
"Bypassing Multifeed Detection for a Fixed Format" (page 78)
.
[Send to/Pause] Button Configuration Number
Displays the number assigned to the application that is launched when
the [Send to/Pause] button is pressed. For information on how to
configure the [Send to/Pause] button, refer to
MF Quick Change Setting
Displays whether or not to detect multifeed as follows:
The icon switches when the [Eject] button is pressed. Normally, one of
the above icons for “Normal” appears when [Enable(Detect)] or
[Enable(Ignore)] is specified. For information on how to configure the
MF Quick Change setting, refer to
. In Doc
Counting mode, one of the above icons for “Doc Counting Mode”
appears regardless of the MF Quick Change setting.
Icon
Detection
method
Normal
Doc Counting Mode
Enable (Detect)
Enable (Ignore)
Information
appears when a message for replacing consumables/cleaning/
replacing maintenance parts/regular maintenance is displayed.
For instructions on when
is displayed, refer to
Prioritize Panel Settings
appears when the operator panel settings are prioritized.
For information on how to prioritize the operator panel settings, refer to
