Fujitsu FI-4990C Operator'S Manual Download Page 106

Page: 106 / 120

6-54

In the <<TEST MODE>> initial screen, press

ENTER

The <<TEST MODE>> menu screen (Offline
Feed Test) appears.

Press

The <<TEST MODE>> menu screen (Op-
tions) appears.

Press

ENTER

The current options list screen appears. You
can check options installed.

To quit the <<TEST MODE>>, turn off the
power.

Options

This function displays the options installed in the scanner.

LCD display

Options

Displayed options

Endorser

* When an option is installed, ON is displayed under the option. When an option is not installed, OFF

is displayed under the option.

The following is an example when you use this function.

Remarks

Endorser: printer that prints back side of

documents.

<<TEST MODE>>

Offline Feed Test

<<TEST MODE>>

Options

Endorser

BG. Change

OFF

F:ON

B:ON

15C6.P65

01.2.17, 5:47 PM

Summary of Contents for FI-4990C

























































































































Search results

Summary of Contents for FI-4990C

Reviews:

Fujitsu FI-4990C, Operator'S Manual, Page: 106 / 120

Search results

Summary of Contents for FI-4990C

Reviews: