Fujitsu fi-434PR, User Manual

Page: 16 / 44

14
Ink or stains stuck to the nozzle surface of the print cartridge or leaving the imprinter unused for a while cause poor
printing of characters because of blocked emission holes in the nozzle. If your imprinter has this trouble, clean the nozzle
surface of the print cartridge.
3
For cleaning, use dry cloth or a lint free cloth, and gently wipe off dirt and stain from the surface of the nozzle. (Do
not use tissue paper.)
(4) Cleaning the Nozzle Surface of the Print Cartridge
Clean the nozzle surface as follows:
Remove the print cartridge. (Refer to Item (1) in this
chapter.)
Gently wipe off the dirt and stain from the nozzle
surface.
1
2
Make sure that the dirt and stain are all removed and then reinstall the print cartridge. (Refer to Item (1) in this
chapter.)
Nozzle surface
Dry cloth
NOTE