Fujitsu FH2417PTSJSN Installation Instructions Manual Download

Page: 8 / 48

AVAILABLE MODELS AT A VOLTAGE

AVAILABLE MODELS AT J VOLTAGE

AVAILABLE MODELS AT D VOLTAGE

Notes:

• Supply circuit protective devices may be fuses or “HACR” type circuit breakers.

• Largest motor load is included in single circuit and multiple circuit 1.

• If non-standard fuse size is specified, use next size larger fuse size.

• J Voltage (208/240V) single phase air handler is designed to be used with single or

three phase 208/240V power. In the case of connecting 3-phase power to the air han-
dler terminal block, bring only two leads to the terminal block. Cap, insulate and fully
secure the third lead.

• The air handlers are shipped from the factory with the proper indoor coil installed, and

cannot be ordered without a coil.

• The air handlers do not have an internal filter rack. An external filter rack or other

means of filtration is required.

2.4A AVAILABLE MODELS

FH6024TTSDSN

FH3617TTSASN

FH3621TTSAHN

FH3621TTSAMN

FH4821TTSAMN

FH4821TTSASN

FH4824TTSASN

FH6021TTSASN

FH6024TTSASN

FH2417TTSJSN

FH3617TTSJSN

FH3621TTSJHN

FH3621TTSJMN

FH4821TTSJMN

FH4821TTSJSN

FH4824TTSJSN

FH6021TTSJSN

FH6024TTSJSN

FH2421TTTJMN

FH3621TTTJMN

FH4824TTTJMN

FH6024TTTJSN

FH2417PTSJSN

Summary of Contents for FH2417PTSJSN

















































Search results

Summary of Contents for FH2417PTSJSN

Reviews:

Related manuals for FH2417PTSJSN

Brands by name

Popular brands

Fujitsu FH2417PTSJSN, Installation Instructions Manual

Search results

Summary of Contents for FH2417PTSJSN

Reviews:

Related manuals for FH2417PTSJSN

Brands by name

Popular brands