Home
/
Fujitsu
/
ETERNUS SF Express V16.6
/
Migration Manual

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share

Page: 252 / 378

Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 252

When the upgrade of the secondary node has been completed, refer to "

10.3.2.7 Tasks to Be Performed After Upgrade (Secondary

" and set up the AdvancedCopy Manager's agent of the secondary node.

Point

If the Upgrade Installation has ended in an error, refer to "

11.3.5 In Case of Problem During Upgrade of AdvancedCopy Manager's Agent

" and return the system to a normal state.

10.3.2.3 Upgrade with Silent Installation Tasks (Primary Node)

The upgrade is performed as follows:

1.

10.3.2.3.1 Upgrade with Silent Installation Tasks (Primary Node)

2.

10.3.2.3.2 Confirming Results of Upgrade with Silent Installation (Primary Node)

10.3.2.3.1 Upgrade with Silent Installation Tasks (Primary Node)

Note that if step 1 and step 2 have already been performed, perform from step 3.

If multiple Managed Server transactions exist, perform this procedure on each primary node for Managed Server transaction.

1.

Log on to the server using Administrator privileges.

2.

Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack (Agent Program and Manual)" for this version into the DVDROM
drive. Furthermore, if the Installer screen is displayed by autorun, exit the installer.

3.

Start the command prompt with "Run as administrator".

4.

Install the AdvancedCopy Manager's agent.
In response to the architecture of the AdvancedCopy Manager's agent confirmed at the operation before upgrade, execute the
commands for silent installation below to install.
For

installLogFile

, specify the file in which to output installation log with an absolute path. It is optional to specify for

installLogFile

.

[When using the 32 bit version Agent]

dvdromDrive:\Agent_windows\AdvancedCopy_Manager\agent\windows_x86\acmagtsilentinstall.bat [-l <

installLogFile>]

[When using the 64 bit version Agent]

dvdromDrive:\Agent_windows\AdvancedCopy_Manager\agent\windows_x64\acmagtsilentinstall.bat [-l

<installLogFile>]

Point

-

If nothing is specified for

installLogFile

, an install log file named "acmagtsilentinstall.log" is created in the working directory

specified by the environment variable TEMP.

-

If there is any file of the same name as the specified install log file, it is overwritten.

-

It is required to specify an existing directory with write permission for the directory in which to store the install log file. If it
has no write permission, no error message is output in the command prompt or screen and the process terminates with error.

-

If the path name of the installation log file contains any spaces, they should be surrounded by double quote characters.

-

The characters " | : * ? / . < > % & ^ ; ! are not supported for path name of the installation log file.

- 228 -

«
...
250
251
252
253
254
...
»

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands