6.
When using the ETERNUS SF SNMP Trap Service, stop the SNMP Trap function.
With the Windows services screen, stop the ETERNUS SF SNMP Trap Service.
Note
In an environment where other software using SNMP Traps such as Systemwalker Centric Manager and ServerView Resource
Orchestrator coexists on a target server, if you stop the ETERNUS SF SNMP Trap Service, other software using SNMP Traps cannot
perform the fault monitoring. Make sure that even if the fault monitoring cannot be performed, no problem is caused, and
perform this step.
7.1.1.2 Performing Upgrade
Refer to "
Point
If the upgrade was terminated abnormally, refer to "
11.3.1 In Case of Problem During Upgrade of ETERNUS SF Manager (for Windows)
to recover the system to the normal state.
7.1.1.3 Tasks to Be Performed After Upgrade
The tasks below need to be performed.
1.
In the version level of this ETERNUS SF Manager, Symfoware is not used.
To upgrade from Version 16.1 or later, the procedures listed below are not needed.
To upgrade from Version 16.0 or earlier, follow the procedures listed below to uninstall the Symfoware Server.
a.
Confirm that other products are not utilizing the Symfoware. If Symfoware is in use by another product, refrain from
uninstalling Symfoware.
b.
Uninstall Symfoware from the Add or Remove Programs or Programs and Features page.
If Symfoware Server and Symfoware Client are both installed, uninstall the Symfoware Client first.
2.
If the SNMP Trap XML definition file is customized in the environment of the previous version, it is necessary to customize this
version as well.
Save the SNMP Trap XML definition file that is stored in the following directory to an arbitrary location.
After that, refer to "SNMP Trap XML Definition File" in the
ETERNUS SF Storage Cruiser Operation Guide
and customize the SNMP
Trap XML definition file. For the contents of the customization, refer to the SNMP Trap XML definition file which was saved to the
arbitrary location.
Directory of the location of Customization Definition files
$ENV_DIR\ESC\Manager\etc\opt\FJSVssmgr\current\snmpth
$ENV_DIR is the "Environment Directory" of when ETERNUS SF Manager has been installed to a new environment.
3.
If the polling service setting file is customized in the environment of the previous version, it is necessary to customize this version
as well.
Save the polling service setting file that is stored in the following directory to an arbitrary location.
After that, refer to "Polling Service Setting File" in the
ETERNUS SF Storage Cruiser Operation Guide
and customize the Polling
Service Setting file. For the contents of the customization, refer to the polling service setting file which was saved to the arbitrary
location.
Customization Definition files
$ENV_DIR\ESC\Manager\etc\opt\FJSVssmgr\current\polling\pollingService.xml
$ENV_DIR is the "Environment Directory" of when ETERNUS SF Manager has been installed to a new environment.
- 87 -
