Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining Download Page 90

Page: 90 / 110

Chapter 5 Servicing the Tape Library
5.5 Removing and Replacing a Power Supply

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining

P3AM-5392-07ENZ0

5.5

Removing and Replacing a Power Supply

The power supply should only be removed by an experienced service technician.

■

To remove a power supply

Power supply is installed at the back of the library. Before you remove the power supply:

Procedure

Turn off power to the library (power button on the front panel).

Remove the power cord cable.

Loosen the three captive thumbscrews on the power supply (see

Figure 5.6

Figure 5.6 Position of the three thumbscrews

Pull straight back on the power supply to remove it from the library (see

Figure 5.7

Figure 5.7 Power supply removal

End of procedure

Summary of Contents for ETERNUS LT40 S2















































































































Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands

Fujitsu ETERNUS LT40 S2, Installing, Starting Up And Maintaining

Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands