Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining Download Page 53

Page: 53 / 110

Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining

P3AM-5392-07ENZ0

3.5.4.3

Viewing Static Network Information

This page provides detailed information about the network(s). No changes can be made from this page.

Figure 3.11 ETERNUS LT40 S2: Identity, Network page

3.5.5

Status

3.5.5.1

Viewing Dynamic Library Information

This page displays the dynamic information about the library, such as the current status of the components.
The following information can be found on this page:

•

Status

•

Cartridge in Transport

•

Number Of Moves

•

Total Power On Time

•

Robotic Status

•

Internal Temperature

•

Power Supply Status

•

Media Removal (allowed or prevented, from on library firmware version 4.70)

•

Magazines

Summary of Contents for ETERNUS LT40 S2















































































































Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands

Fujitsu ETERNUS LT40 S2, Installing, Starting Up And Maintaining

Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands