manualshive.com logo in svg

Fujitsu ETERNUS LT140, User Manual, Page: 14 / 54

Share
Download
Fujitsu ETERNUS LT140 User Manual Download Page 14

Chapter 1  Overview
  1.2  References for Setup

FUJITSU Storage ETERNUS LT140 Tape Library User’s Guide -Server Connection-

Copyright 2019 FUJITSU LIMITED

P3AG-3752-03ENZ0

14

1.2.2.2

Fibre Channel Connection (FC-AL Connection) for Linux

The following procedure explains how to connect the LT140 to a Linux server with an FC-AL connection (direct
connection to a server).

Workflow

Setting Backup Software

Apply patches, make settings for the robot driver, and set up the backup software.

•

Backup software used

-

NetBackup

•

"4.1 NetBackup" (page 34)

-

NetWorker

•

"4.2 NetWorker" (page 37)

-

IBM Spectrum Protect (IBM Tivoli Storage Manager)

•

"4.3 IBM Spectrum Protect" (page 38)

-

NetVault

•

"4.5 NetVault" (page 40)

Refer

Making a Check before Starting the Procedure

Check the environment (operating system, backup software, and HBAs) of the server to be 
connected to the LT140.

-

"1.1 Operating Environment" (page 8)

Refer

Summary of Contents for ETERNUS LT140























































Reviews:

No comments