Chapter 7 Setup
7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
156
Copyright 2011 FUJITSU LIMITED
P3AM-3042-08ENZ0
■
For iSCSI
On the [Setup iSCSI Host] screen, set the iSCSI name, IP address, and other items for the
server being connected to the ETERNUS DX60/DX80.
(1)
Click the [Add] button on the [Setup iSCSI Host] screen
(2)
Specify an iSCSI name, IP address, server name, host response, and CHAP pass-
word.
Figure 7.16 [Setup iSCSI Host] screen
(3)
Specify the other necessary items, and click the [Add] button.
The target iSCSI host is displayed in the "Registered iSCSI Host List" field.
(4)
When adding another iSCSI host, repeat
and
.
If another iSCSI host does not need to be added, click the [Done] button.
(5)
Click the [Next >] button.
A confirmation screen appears.
(6)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
appears.
