Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > set advanced-copy-policy
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
389
set advanced-copy-policy
This command sets the Advanced Copy pool policy (the threshold value of the Snap Pool area usage for each
policy level).
■
Syntax
■
Parameter
■
Example(s)
set advanced-copy-policy -level {information | warning | error} -threshold
threshold
-level
This parameter specifies the policy level of the Advanced Copy. Only one policy level can be
specified at the same time.
information Information level.
•
Settable range is 1 – 97%.
•
Default value is 50%.
warning
Warning level.
•
Settable range is 2 – 98%.
•
Default value is 70%.
error
Error level.
•
Settable range is 3 – 99%.
•
Default value is 99%.
-threshold
This parameter specifies a threshold corresponding to the specified policy level.
It must be based on the following rule:
0% < Information level < Warning level < Error level < 100%
The following example sets the Warning level to 80%:
CLI> set advanced-copy-policy -level warning -threshold 80
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......