Fujitsu ETERNUS DX400 series, Configuration Manual

Page: 7 / 17

Chapter 1 Workflow
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED P3AM-3972-08ENZ0
7
After completing all the required procedures in this manual, follow the procedures in "FUJITSU
Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI)" for each OS.
Setting the Affinity Groups
Set the server accessible LUN groups.
Refer
-
"2.1.4 Setting the Server Accessible LUN Groups (Setting Affinity Groups)" (page 12)
Setting Host Affinity Groups
Define the relationship between the iSCSI card HBA and LUN group.
Refer
-
"2.1.5 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 13)
When setting CHAP authentication When not setting CHAP authentication
Setting CHAP Authentication
Set CHAP authentication to enhance security for
an iSCSI connection.
Refer
-
"2.1.6 Setting CHAP Authentication" (page
13)
Setting the CA Reset Groups
Assign the iSCSI ports of the ETERNUS DX to the same reset group, depending on the connection
conditions.
Refer
-
"2.2.1 Setting the CA Reset Groups" (page 14)