manualshive.com logo in svg

Fujitsu ETERNUS DX S5 Series, Design Manual

The Fujitsu ETERNUS DX S5 Series comes with an easy-to-understand Operation Manual (Basic) that provides comprehensive guidance for users. This manual can be downloaded for free from our website, allowing you to access all the necessary information about your product effortlessly. Find it at manualshive.com, ensuring a smooth user experience.

Share
Download
background image

Access Control in a Shared CIFS/NFS Environment

When the CIFS protocol and the NFS protocol are used, the access control varies depending on the version of
NFS.
The NFS access control varies depending on the NFS version.
For details, refer to 

"Access Control in an NFS Environment" (page 182)

.

If the same name is used for the local user and the local group without case sensitivity when a local user is
registered in ACL, access control may not be set correctly for Windows.

Caution

During the operation phase

•

Even though advanced security settings are specified with Windows ACL, the ACL security setting for
some users or groups may be unintentionally overwritten by an ACL setting that is performed later or
may not be enabled when the CIFS protocol and the NFS protocol are used at the same time.

•

Even though advanced security settings are specified with Windows ACL, the UNIX POSIX ACL converts
them to Read permissions, Write permissions, and Execute permissions and maps these permissions.
Accesses from other Windows clients are controlled by privileges mapped to POSIX ACL.

•

When adding ACL user from Windows, a security ID (Security ID) may be displayed instead of the name
that is specified from other Windows clients. If this occurs, disconnect the network drive and wait for a
while. After rebooting the network drive, the specified name is displayed.

 

CIFS Access Permission Settings

Access permissions can be set for a specific user or group when a CIFS shared folder is created.
The group "everyone" can be specified as a group. Access permissions can be changed for existing CIFS shared
folders. The CIFS access permission setting can grant access permissions for users or groups who have access
permissions that are granted by the ACL function.
When "everyone" is specified as the group, the privileges that are set for "everyone" are granted to all users.
However, users that are granted the "rw" access privilege can read and write data regardless of the privileges
that are set for "everyone".
Access permissions for the CIFS shared folders can be changed using ETERNUS Web GUI or ETERNUS CLI.
The changed settings are applied to sessions that are established after the change.

Caution

During the configuration phase

To use the CIFS access permission setting for access control of a shared folder, either omit the owner and
group settings or specify "root" when creating a shared folder. For details on the owner and group settings
of the shared folder, refer to 

"File Sharing" (page 184)

.

 

4. NAS Functions

CIFS Access Permission Settings 

183

Design Guide

Summary of Contents for ETERNUS DX S5 Series
















































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX S5 Series

DB GROUP HERRAJES 803 Assembly Instruction preview
803
Brand: DB GROUP HERRAJES Pages: 4
NEC Built-In AIT User Manual preview
Built-In AIT
Brand: NEC Pages: 59
Feider Machines FAJ200A Owner'S Manual preview
FAJ200A
Brand: Feider Machines Pages: 20
V-Bro Products Garage Gator GGR220 Installation, Operating, And Safety Instructions preview
Garage Gator GGR220
Brand: V-Bro Products Pages: 18
Lifetime 60066 Owner'S Manual preview
60066
Brand: Lifetime Pages: 32
Rorke Data A16F-R2431 Galaxy Raid Installation And Hardware Reference Manual preview
A16F-R2431 Galaxy Raid
Brand: Rorke Data Pages: 110
Quantum STD2401LW Installation Instructions Manual preview
STD2401LW
Brand: Quantum Pages: 88
AIC SB302-LB User Manual preview
SB302-LB
Brand: AIC Pages: 101
German pool auto-vacuum VAC-20 Operating Instructions Manual preview
auto-vacuum VAC-20
Brand: German pool Pages: 16
Sans Digital Mobileraid MR8X Detailed User'S Manual preview
Mobileraid MR8X
Brand: Sans Digital Pages: 81
kioxia EXCERIA G2 Quick Start Manual preview
EXCERIA G2
Brand: kioxia Pages: 24
Western Digital WDBGLG0010HBK Product Specifications preview
WDBGLG0010HBK
Brand: Western Digital Pages: 2
Silverline 666247 Quick Start Manual preview
666247
Brand: Silverline Pages: 2
Synology DS1621xs+ Hardware Installation Manual preview
DS1621xs+
Brand: Synology Pages: 28
HOLZMANN MASCHINEN WB160L Assembly Instruction Manual preview
WB160L
Brand: HOLZMANN MASCHINEN Pages: 18
ramia SCH-GP Assembly Instructions preview
SCH-GP
Brand: ramia Pages: 3
OLT GS124-SLIDER-METAL-AK Assembly Manual preview
GS124-SLIDER-METAL-AK
Brand: OLT Pages: 44
NITEO TOOLS 202012 User Manual preview
202012
Brand: NITEO TOOLS Pages: 8

Brands by name

Popular brands

Load more brands