10.9 System
Backpanel Locations
The
Backpanel Locations
section at the bottom of the
Network
page displays a graphical
representation of the Ethernet ports as they appear on the rear of the system (see
).
The diagram indicates the current bonding configuration and connectivity status for all
Ethernet ports.
l
Ports that are bonded together in an interface are shaded the same color.
l
A green border indicates a port is connected to a network.
l
A red border indicates a port is configured but is not connected to a network.
l
Click
Update Port View
to update the information on the diagram.
10.9.2 Date & Time
The
Date & Time
page allows you to set the system date and time of the ETERNUS CS800.
You can specify a Network Time Protocol (NTP) server to synchronize the system time with,
or you can manually enter the date and time.
CAUTION!
Changing the date and time settings requires a system reboot immediately after the
changes are applied. Wait for at least 15 minutes before logging back in.
If you intend to join the ETERNUS CS800 to a Windows network using Active
Directory for NAS storage, ETERNUS CS800 recommends using an NTP Server to
set the system date and time (see
).
To access the
Date & Time
page, on the
System
page, click the
Date & Time
tab (see
).
Figure 212: Date & Time Page
ETERNUS CS800
307
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
