10.3 VTL Configuration
Adding a Remote Host Access Group
Add a host access group to associate a VTL partition with a host (a Fibre Channel initiator
on the SAN) and a target (a Fibre Channel port on the ETERNUS CS800).
To add a host access group:
1. Click
Add
.
The
Map Remote Hosts, Define Groups
page displays (see
).
Figure 157: Map Remote Hosts, Define Groups Page
2. Enter information about the host access group:
Group Name
Enter a name for the group.
Partition
Select the partition to associate with the group.
Remote Host
Select the host (initiator) to associate with the
group.
You must configure a host before it is available
in the
Host
drop-down box (see
).
ETERNUS CS800
222
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
