10.3 VTL Configuration
If you do not create and associate a host access group with a partition, the
virtual devices are not visible from the host, and drives cannot be destinations
for move operations (see
"Remote Host Access" on page 220
).
CAUTION!
Moving a virtual tape cartridge might disrupt backup jobs.
To access the
Media Move
page, on the
Media
page, click the
Move
tab (see
).
Figure 154: Media Move Page
To move a virtual tape cartridge:
1. In the
Partition
drop-down box, select the partition that contains the cartridge to
move.
2. If the partition is online, click
Offline
to take the partition offline. To move media, the
partition must be offline.
3. In the
Source Location
drop-down box, select the type of location you want to move a
cartridge from (
Drive
,
Storage Slot
,
I/E Slot
).
4. (Optional) If you are moving a cartridge from a drive, select the
Force Unload (Virtual
Tape Drives)
check box to force the drive to unload the cartridge before ejecting it.
5. (Optional) To reduce the number of cartridges displayed in the table, enter a barcode
or barcode range in the
Barcode Filter
box and click
Apply Filter
.
Use a hyphen (
-
) to indicate a range, and use an asterisk (*) to indicate a wildcard.
Separate multiple entries with commas, and do not use spaces.
Example:
Enter
AAA*
to display all cartridge barcodes beginning with AAA. Or enter
AAA010-AAA020
to display all barcodes in the specified range. Click the
Quick Tip
icon
[?]
for additional examples.
ETERNUS CS800
217
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
