manualshive.com logo in svg

Fujitsu ESPRIMO P5100, User Manual

Share
Download
Fujitsu ESPRIMO P5100 User Manual Download Page 17

3

■

Initial Switch-on: Software will be Installed

If the PC is connected to a network, the network protocol is required as well as the user and
server details. Contact your network administrator if you have any questions about these
settings.

When you switch on your PC for the first time, the supplied software is installed and configured.
You should plan some time for this, as this process must not be interrupted.

 CAUTION

Once the installation has been started the PC must not be switched off!

During installation the PC may only be rebooted when you are requested to do so!

Otherwise the installation will be not be performed correctly. If a fault occurs during the installation,
the contents of the hard disk must be completely restored.

 

Switching on monitor and PC

●

Switch the monitor on.

●

Switch the PC on. To do this, follow the instructions below.

Switching on PC with devices with main power switch

1

ON/OFF switch

●

Press the ON/OFF switch on the front of the PC.
The power-on indicator lights green and the PC is started.

Installing the software

●

During installation, follow the instructions on screen.

Consult the operating system manual if there is anything unclear about the requested input data.

You will find further information about the drivers on the “Composite/Software Drivers” CD.

1

P5100_1(01-06)

14/6/06, 2:29 pm

3

Summary of Contents for ESPRIMO P5100

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands