Fujitsu DL7400, User Manual

Page: 62 / 275

PAPER HANDLING
3-4
User's Manual
Table 3.1 Buttons Used for Paper Handling (Cont.)
Button/Dial Purpose Action
PRINT
MODE/
FRONT DIR Select cut
sheet ejection Press PRINT MODE/FRONT DIR at Offline to
select a direction of ejecting cut sheet.
•
Front ejection – FRONT indicator lights. It
blinks when paper is ejected to
the paper table prompting the
user to remove the paper.
•
Rear ejection – FRONT indicator does not
light.
When you save your setting in the setup mode, it
becomes the new default. The default setting is
invoked whenever you turn on the printer.
S
MICRO
T MICRO
Micro Feed Press
S
MICRO/
T
MICRO to feed paper by 1/180
inch in the direction of the arrow.
AUTO GAP Select paper
thickness
control mode Select paper thickness control mode.
AUTO GAP — AUTO GAP indicator lights.
Manual Gap — AUTO GAP indicator doesn't
lights.
The Manual Gap dial is enabled.
MANUAL
GAP DIAL Select paper
Thickness at
MANUAL
MODE Select the paper thickness at MANUAL MODE.
Auto Gap is usually used. Auto Gap is used for
printing on paper of different thicknesses.