D3031 (RX200 S6)
Technical Manual
35
Features
Settings
Proceed as follows to delete the CMOS settings:
Ê
Create a backup of all the data.
Ê
Shut down the server.
Ê
Remove all power and peripheral cables.
Ê
Remove the fan cover and the housing cover.
Ê
If necessary, remove the expansion card that prevents access to jumper JP2
(Clear CMOS).
Ê
Remove jumper JP2 from position 1-2 and insert it in position 2-3 for 20 to
30 seconds.
Ê
Insert jumper JP2 in position 1-2 again.
Ê
Reinsert the expansion card.
Ê
Reinstall the housing cover and the fan cover.
Ê
Connect all the power and peripheral cables again.
Ê
Switch the server on again.
Ê
During the POST process press
[F2]
in order to enter the Setup Utility.
Ê
Press
[F9]
to set the system defaults.
Ê
Press
[F10]
to save your changes and to exit the Setup Utility.
Protect RTC jumper - JP5
Jumper
Pos.
Description
1-2
Normal operation (default setting)
2-3
Clear ME_RTC REG
