Fujitsu D2785, Technical Manual

Page: 5 / 34

D2785 (TX120 S2)
Technical Manual 5
1 Introduction
This technical manual describes the system board D2785, which is equipped
with one Intel
®
processor.
You will find further information in the manual “BIOS Setup”.
Further information about drivers is provided in the readme files on the hard
disk, or on the supplied CDs/DVDs.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
Text in talics indicates commands or menu items.
Text in fixed font
indicates system output on the monitor.
Text in semi-bold
fixed font indicates values to be entered through the
keyboard.
[Key symbol] indicates keys according to their representation on
the keyboard.
If capital letters are to be entered explicitly, then the
Shift key is shown, e.g.
[SHIFT]
-
[A]
for A.
If two keys need to be pressed at the same time,
then this is shown by placing a hyphen between the
two key symbols.
“Quotation marks” indicate names of chapters and terms that are
being emphasized.
Ê
describes activities that must be performed in the
order shown.
V
CAUTION! describes activities that must be performed in the
order shown.
I
indicates additional information, notes and tips.
Table 1: Notational conventions