42
Technical Manual
D2119
(RX300
S3)
RAID on Motherboard (ROMB)
SAS and RAID
SAS/RAID configuration program WebBIOS
WebBIOS
allows to modify or control the controller settings and the RAID config-
uration.
WebBIOS
is called by the key combination
[CONTROL][h]
during the
controller’s POST. When the boot process has been finished,
WebBIOS
will be
started. The controller selection is the start page, shown in
. The further
actions will be executed on the selected controller. You validate the controller
with Start. Start calls the main menu, shown in
. The main menu allows
to get all information and settings which are offered by
WebBIOS
.
Figure 9: WebBIOS start page controller selection
