Fujitsu D1483, Tehnical Manual

Page: 25 / 28

Interfaces and connectors
A26361-D1483-Z120-1-7619
English - 17
Upgrading Main Memory
These slots are suitable for 128, 256, 512 and 1024 Mbyte LP DDR memory modules. The board
supports a maximum of 3 Gbytes.
!
You may only use buffered 3.3 V memory modules. Unbuffered memory modules are not
permitted. You may only use unstacked modules.
LP DDR memory modules must be designed for a clock frequency of 133 MHz (meets
PC2100 specification).
Installing a Memory Module
2
2
Ê
Push the holders on each side of the memory compartment outwards.
Ê
Insert the memory module in the slot while folding the side holders up until the memory module
engages (2).
Removing a Memory Module
1
1
Ê
Push the clips on the right and left of the compartment outward (1).
Ê
Carefully remove the memory module from the compartment (2).