Fujitsu D1170, Technical Manual

Page: 19 / 22

Add-on modules
A26361-D1170-Z120-5-7419
English - 11
Installing and removing processors
3
2
1
A
4
5
Ê
Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
Ê
Remove the old processor from the socket (3).
Ê
Insert the new processor in the socket so that the angled corner of the processor matches the
coding on the socket (A) with regard to the position (4).
!
The angled corner of the processor may be covered by the heat sink. In this case let
yourself be guided by the marking in the rows of pins on the underside of the processor.
Ê Push the lever back down so that it snaps into place.