Cremson Starterkit User Manual
Chapter 7 . Appendix
Problem
Solution
The windows of the debugger are
empty.
* This is due to a wrong (maybe old) path
information. Closing all windows in the
debugger should fix the problem.
When trying to program the
application to the embedded flash, the
programmer stops at first address with
“loading error” !
* You are probably trying to program a
program to the flash which is linked for the
external RAM area. See Appendix for details
on the linker settings.
Hardware units such as LEDs, user
buttons, UART0 or CAN are not
working.
∗
Make sure you have enabled these units on
the evaluation board using the appropriate
jumpers (e.g. JP25 for LEDs). See the
provided examples and the hardware manual
for information on how to control the
peripherals.
CAN devices do not respond
∗
Adjust the potentiometer RV2 (slew rate)
according to the line.
Table 8: Trouble Shooting
For more information see the Softune Workbench on-line help, the provided manuals, last
minute information and additional or updated documentation on our web-site.
- 36 -
© Fujitsu Microelectronics Europe GmbH
