EXTERNAL CONTROLS AND CONNECTORS
TOP/FROMT VIEW
BACK VIEW
Fig.1
Lens Mount
The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed
between the lens and camera.
!
Back Focus Lock Screw
Loosen to adjust the back focus to match the lens attached to the CS mount. Refer to the section on Back Focus
Adjustment in this manual.
"
Camera Mounts
Top or bottom mounting. Maximum thread length is 3/16-inch. Attach the camera mount adapter to extend
thread depth to a standard 1/4-inch.
#
Video Output Connector
This coaxial connector (BNC type) outputs the video signals.
$
Lens Connector
Four-pin DC-control connector for auto iris lens. Refer to the section on Lens in this manual for pin connections.
%
Setup Switch
This is the switch to display and operate the menu when OSD function is used.
it is used for the selection of ON or OFF. Refer to the section on Setting Operation in this manual.
&
Power Input Terminal
Three-pin terminal strip, push-in type; 24 VAC/12 VDC for NTSC/PAL models.
En-6
"
"
"
"
"
#
#
#
#
$
$
$
%
%
&
1
2
3
4
5
6
7
