Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Ports on the device
Ports
Externaldevices
Device
The ports are located on the front and back of the device. The ports available on your
device depend on the con
fi
guration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Headphones jack, light green
Headphones
Microphone jack, pink
Microphonejack
Audio output (Line out), light green
Audiooutput
Lineout
Audio input (Line in), light blue
Audioinput
Linein
USB 2.0 - Universal Serial Bus, black
USB 3.0 - Universal Serial Bus, blue
UniversalSerialBus
eSATA
eSATA port (optional)
eSATA
LAN
LAN port
LANport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
16
Fujitsu